LG OLED88ZX9LA - Page 19

(3-1) Unscrew the Shaft(C) 4EA on the underside of a stand-top. (Use hexagonal wrench)
※ The Shaft(C) is not completely separated from the Stand. (The Shaft(C) is fixed to the Stand by washer.)
(4-1) Lift the Head part and separate it from the Stand.
3-1
4-1
C
C
C
C
C
The Shaft is fully released status.
(※ The Shaft is not separated from the Stand)
OLED88ZX - Working Guide
Copyright © 2020 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.