(7-1) Unscrew the Power Box Fixation Screw(E) 3EA on the back of the Stand.
(7-2) Separate the Power Box from Stand by pulling the DC Cable and the Power Code Cable.
※ Pull out gently while pulling the left and right simultaneously to avoid damage or missing the cable.
7-1
7-2
E
E
E
Power Box
※ As follows, When re-assembling the Power Box
Make sure that the Guide Pem-nut on the Power Box is
inserted into the Stand inner Guide Rail.
For normal assembly, the left and right sides must be
inserted to the end at the same time.
OLED88ZX - Working Guide
To Next Page
Loading...
