LG PA75U User Manual

30
WATCHINGWITHTHEPROJECTOR
UsingtheProjector
TurningontheProjector
1 Connect the power cord correctly.
2 After waiting for a moment, press
the POWER button on the remote
control or the control panel.
(The light on the control panel will be
turned on.)

Check if the lens cap is open before
turning on the projector.
3 In the Language Selection screen,
select a language.
4 Select an input signal by using the
INPUT button on the remote control.
FocusandPositionofthe
ScreenImage
When an image appears on the
screen, check if it is in focus and
ts the screen properly.
Focus Ring

To adjust the focus of the image,
rotate the focus ring.
UsingtheProjector
1 In Standby mode, press the POWER
button to turn the projector on.
2 Press the INPUT button and select
the input signal you want.
3 Control the projector using the
following buttons while watching the
screen.
Button Description
CH
Changes the TV channel.
List Displays the channel list.
0-9 Enters a channel number.
VOL-,+ Adjusts the volume level.
MUTE Mutes the sound of the
projector.
FLASH-
BK
Displays the channel
you were watching previ-
ously.
Key's
▲,▼
Adjusts the Keystone
settings.
4 To turn the projector off, press the
POWER button.

LG PA75U Specifications

General

Brand	LG
Model	PA75U
Category	Projector
Language	English