1. MAIN POWER (POWER vv)
switches the set on or off.
2. FF / GG (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
DD
/
EE
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
3. POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby
mode.
dims when the set is switched on.
4. DIGITAL INDEX
displays information which is input to the set
with three different brightness.
5. MENU
selects a menu.
6. OK
accepts your selection or displays the current
mode.
7. TV/AV
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
8. REMOTE CONTROL SENSOR
9. EYE (option)
adjusts picture according to the surrounding
conditions.
10. AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of exter-
nal equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-
VIDEO VCR to the audio sockets as in AV3.
11. CENTRE SPEARKER (
PT-48/53A80 series only
)
Only when the Turbo Sound is on, this speak-
er works.
LEFT/RIGHT LOUD-SPEARKERS
Only in PT-48/53A80 series model, the
left/right loud-speakers are detachable and
need to be connected to the SPEAKER OUT
sockets on the back panel of the set as indi-
cated by red (+) and black (-) knobs.
Note : Before placing the speakers, screw the
speaker legs to the holes on them.
*
CASTERS (on the bottom)
turn and move the set easily.
To Next Page
Loading...
