To Next PageTo Next PageWhat to do if my LG RC8011A Dryer doesn't work?
If your LG Dryer isn't working, make sure it's properly plugged in and that you've pressed the 'Start' button. Also, ensure the door is fully closed and the room temperature is above 5°C. Check the fuse and circuit breaker. If the water container was emptied or the filter was cleaned during operation, press the Start button again.
Why does my LG RC8011A Dryer take so long to dry?
If your LG Dryer takes too long, ensure the filter is cleaned after each load and the water container is emptied. Check the condenser for cleanliness and make sure the correct program setting is selected for the fabric type. Verify that the air ventilation grille or rear vents aren't blocked and that clothes aren't excessively wet or overloaded. Also, double-check that you've selected the right program.
What to do if the 'Clean Filter' light is flashing on my LG RC8011A?
If the 'Clean Filter' lamp flashes on your LG Dryer, check if the filter is cleaned and if the condenser unit is clogged.
How to troubleshoot an LG RC8011A that doesn't work?
If your LG Dryer isn't working, here are a few things to check: 1. Ensure the dryer is properly plugged in. 2. Make sure you've pressed the "Start" button. 3. Confirm that the door is completely closed. 4. Verify the room temperature is above 5°C. 5. Inspect the fuses or circuit breakers and replace them if necessary. Note that electric dryers typically use two fuses or breakers. Also, after emptying the water container and cleaning the filter during operation, you must press the Start button to resume the drying cycle.
Why does my LG Dryer take so long to dry clothes?
If your LG Dryer is taking longer than usual to dry clothes, consider the following: 1. Clean the filter after each load. 2. Empty the water container. 3. Check the condenser for cleanliness. 4. Ensure you've selected the correct program setting for the fabric type. 5. Verify that the air ventilation grille or rear vents of the dryer are not obstructed. 6. Make sure the clothes are not excessively wet when you put them in the dryer. 7. Confirm that the correct program is selected. 8. Avoid overloading the dryer.
What to do if the 'Clean Filter' light flashes on my LG RC8011A Dryer?
If the "Clean Filter" lamp is flashing on your LG Dryer, it indicates that: 1. The filter needs to be cleaned. 2. The condenser unit may be clogged. Make sure to check both.
What to do if the 'Clean Filter' lamp flashes on my LG RC8011A Dryer?
If the 'Clean Filter' lamp is flashing on your LG Dryer, check if the filter is cleaned. Also, verify that the condenser unit isn't clogged.
How to prevent my LG RC8011A from leaving fluff on clothes?
If your clothes are covered in fluff after using the LG Dryer, make sure the lint filter is empty and that you're only drying clean items. Ensure the laundry is properly sorted in the drum and not overloaded. Also, check for any paper, tissue, or similar items in the pockets of the laundry.
Why are my clothes covered in fluff after using my LG RC8011A Dryer?
If your clothes are coming out of the LG Dryer covered in fluff, try these steps: 1. Empty the lint filter. 2. Ensure you are only drying clean items. 3. Sort the laundry properly in the drum. 4. Avoid overloading the dryer. 5. Check pockets for any paper, tissue, or similar items before drying.
How to stop my LG Dryer from wrinkling clothes?
If clothes are wrinkled after using your LG Dryer, make sure that the laundry is not overloaded. You can also try a shorter drying time and remove items while they still retain a slight amount of moisture.
General| Capacity | 8 kg |
|---|---|
| Dimensions (H x W x D) | 850 x 600 x 640 mm |
| Noise Level | 64 dB |
| Display Type | LED |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Drying Programs | Cotton, Delicate, Wool, Sportswear |
