39
TROUBLESHOOTING
ENGLISH
Operation
Symptoms Possible Cause & Solution
Appliance will not turn
on.
Power cord is not properly plugged in.
• Make sure that the power plug is securely plugged into a grounded outlet
matching the appliance's rating plate.
House fuse is blown, circuit breaker has tripped, or power outage has
occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the
problem is a circuit overload, have it corrected by a qualified electrician.
Appliance does not
heat.
House fuse is blown, circuit breaker has tripped, or power outage has
occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the
problem is a circuit overload, have it corrected by a qualified electrician.
Water leaks. The water container hose or the optional drain hose is not connected
correctly.
• Connect the water container hose or the optional drain hose correctly.
The door is closed while clothes or foreign substance is caught in the
door.
• Check if clothes or foreign substance is caught in the door before using the
appliance. If water leaks continuously, contact the LG Electronics
Customer Information Centre.
Appliance runs and
pauses by itself after
the drying cycle
finishes.
This is how the anti crease option works.
• Make sure that the anti crease option has been set. The option is designed
to prevent creases that are formed when the clothes are not unloaded
promptly after the drying cycle. When the option is set, the appliance runs
for 10 seconds and pauses for 5 minutes. The option is works for up to 2
hours.
To Next Page
Loading...
Need help?
General
