22
Adjust the network settings
Software Update – Your recorder is able to keep the built-in digital tuner up to
date with the latest software. You can either check for updates manually, or
have the unit do it automatically at regular interval.
While the unit is in updating, there may have a disruption in reception for a few
hours. The reception should return to normal after the update is complete.
This unit must be plugged into AC power to receive updates. Do not unplug
your recorder while an update is in progress. The update is not available during
recording, Timeshift, viewing teletext or EPG menu.
[Standby mode] Updates the software when this unit is turned off. The check
mark appears when this option is selected.
[Operation Mode] Update the software when this unit is turned on. The check
mark appears when this option is selected.
[Time] Set the time to update the software.
[Freq] Selects the updates interval.(Weekly or Daily)
[Start] Updates the software immediately.
System Information – Shows system information. (software version,
DTV Signal Quality and DTV Signal Strength)
To Next Page
Loading...
Need help?
General
