LG S75Q User Manual

8
Connecting the wireless subwoofer manually
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the
subwoofer. If this is the case, connect them in the following order.
a Press the Power
button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless subwoofer. Check if the LED on the back of the
subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on
the back of the subwoofer again.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the back of the wireless subwoofer light up
green.
Note
• Install the sound bar as close to the wireless subwoofer as possible. The closer the distance between the sound
bar and the wireless subwoofer, the better the sound quality.
• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless
subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,
microwave ovens, etc.).

LG S75Q Specifications

General

Audio decoders	DTS Digital Surround, DTS-HD HR, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
Equalizer modes	Bass Blast, Bass Blast+, Movie
RMS rated power	380 W
Audio output channels	3.1.2 channels
Soundbar mode control	Yes
Top speaker RMS power	70 W
Center speaker RMS power	30 W
Front speakers RMS power	60 W
Audio sample rate (24bit)	96 kHz
Front speaker sensitivity	83 dB
Center speaker sensitivity	82 dB
Impedance	4 Ω
Number of speakers	6
Soundbar speaker RMS power	120 W
Subwoofer type	Active subwoofer
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	6 \
FM radio	No
Color name	Dark Steel Silver
Display type	LCD
Product color	Gray
Audio formats supported	AAC, AAC+, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Sustainability certificates	ENERGY STAR
HDMI in	1
Bluetooth codec	SBC / AAC
Bluetooth version	4.2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Soundbar power consumption	38 W
Power consumption (standby)	0.5 W
Power consumption (typical)	71 W
Subwoofer power consumption	33 W
Package type	Box
Package depth	247 mm
Package width	1027 mm
Package height	470 mm
Package weight	13700 g
Cables included	HDMI
Number of products included	1 pc(s)

Weight and Dimensions

Depth	119 mm
Width	890 mm
Height	65 mm
Soundbar weight	3790 g
Subwoofer depth	290 mm
Subwoofer width	180 mm
Subwoofer weight	5800 g