LG S90QY User Manual

11
Attaching the ferrite core (optional)
A ferrite core may not be provided depending on national standards.
Attaching the ferrite core to the speaker cables
Attach the ferrite core to the cables to reduce radio noise.
a Pull Part [a] to open the ferrite core.
b Wind the wireless receiver's speaker cables twice around the ferrite core. A distance of about 18 cm (7.1
inch) is required between the wireless receiver and the ferrite core.
c Close the ferrite core until you hear a click.

LG S90QY Specifications

General

USB port	Yes
Ethernet LAN	No
Bluetooth codec	SBC / AAC
Bluetooth version	5
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Package type	Box
Package depth	261 mm
Package width	1296 mm
Package height	574 mm
Package weight	20800 g
Subwoofer type	Active subwoofer
Subwoofer sensitivity	86 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	8 \
Soundbar power consumption	78 W
Power consumption (standby)	0.5 W
Power consumption (typical)	118 W
Subwoofer power consumption	40 W
Color name	Dark Steel Silver
Display type	LCD
Product color	Silver
Audio formats supported	AAC, AAC+, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	DTS-HD HR, DTS-HD Master Audio, Dolby Digital Plus, DTS:X, Dolby Atmos, Dolby Digital, DTS Digital Surround, Dolby TrueHD
Equalizer modes	Bass Blast+, Bass Blast, Movie
RMS rated power	570 W
Audio output channels	5.1.3 channels
Front speakers RMS power	90 W
Audio sample rate (24bit)	96 kHz
Center speaker sensitivity	83 dB
Sustainability certificates	ENERGY STAR
Cables included	HDMI
Number of products included	1 pc(s)
Impedance	4 Ω
Number of speakers	9
Soundbar speaker RMS power	350 W

Weight and Dimensions

Depth	135 mm
Width	1200 mm
Height	63 mm
Soundbar weight	5030 g
Subwoofer depth	403 mm
Subwoofer width	201 mm
Subwoofer height	407 mm
Subwoofer weight	10000 g