7
e Plug the power cable into the sound bar.
f Plug the power cable connected to the sound bar into an outlet.
g When the connection is automatically established, you will see the LEDs on the back of the wireless
subwoofer and wireless rear speakers light up in green.
Checking the connection with the LEDs on the back of the wireless
subwoofer and wireless rear speakers
You can check the connection status by looking at the LEDs on the back of the wireless subwoofer and wireless
rear speakers.
LED Color Status
Blinking green Connecting in progress
Green Connected successfully
Red Bad connection, or the subwoofer or wireless rear speakers are in standby
Off Power cable not connected
To Next Page
Loading...
