SMART TV Quick Setup Guide
SMART Settings NETWORK Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct.
With Smart Share, you can share files or screens of devices connected to Wi-Fi Direct.
If Wi-Fi Direct is set to On, a list of available devices
appears.
To use Wi-Fi Direct, go to Settings NETWORK and
set Wi-Fi Direct ( ) to On.
When you are prompted to request connection, select Yes
Wi-Fi Direct is now connected to your TV.
* If you are not using Wi-Fi Direct to minimize the interference between Wi-Fi devices,
it is recommended to set Wi-Fi Direct ( ) to Off. You can use only devices that support Wi-Fi Direct.
Miracast allows a portable device to securely send video and sound to the TV wirelessly.
1
Miracast should be set to ON ( ) on your mobile device And TV.
Go to the Network settings to set the Miracast.
2
When your TV or portable device is detected, select the device.
Device Screen
Miracast
TM
/ Intel’s WiDi
Device Name
Connection
The device which is applied Miracast
TM
and intel’s WiDi
technology can be shown on the TV.
Miracast
TM
/ Intel’s WiDi
AAA
On
To Next Page
Loading...
