LG SP8A User Manual

4
Manually connecting the sound bar to the wireless subwoofer ([ See
“Connecting the wireless subwoofer manually” on page 8.)
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected
to the subwoofer. If this is the case, connect them in the following order.
A Press the Power
button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless subwoofer. Check if LED blinks
green.
- If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the
back of the subwoofer again.
C Press the Power
button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the back of the wireless
subwoofer.

LG SP8A Specifications

General

Brand	LG
Model	SP8A
Type	Soundbar
Channels	3.1.2
Total Power	440W
Dolby Atmos	Yes
DTS:X	Yes
Google Assistant Built-in	No
Bluetooth	Yes
HDMI eARC	Yes
AI Sound Pro	Yes
Subwoofer	Wireless
HDMI Input	1
HDMI Output	1
Wi-Fi	Yes
Connectivity	Bluetooth