LG SP8YA Service Manual

1-8
Copyright © 2021 LG Electronics Inc. All rights reserved.
Only for training and service purposes.
1. Preparation
1) SP8 Series Units : Main Unit, Wireless Subwoofer Unit, Rear Speaker Unit(optional)
2) SP8 RCU
3) USB Memory
4) Smart Phone with “LG Wi-Fi Speaker” App
Caution :
• Take care not to power off during update.
• Do format USB memory before update (FAT32 fi le system).
FIRMWARE UPDATE GUIDE
<Main Unit>
Necessary
<RCU>
Necessary
<Wireless Subwoofer Unit>
If wireless subwoofer rx module
of primary unit is updated
<USB Memory>
for USB update
<Rear Speaker Unit>
Optional as model suffi x.
If wireless rear rx module
is updated.
<Smart Phone>
for OOBE update
“LG Wi-Fi Speaker” App
must be installed.

LG SP8YA Specifications

General

RMS rated power	440 W
Audio output channels	3.1.2 channels
Soundbar mode control	Yes
Top speaker RMS power	50 W
Surround modes quantity	1
Front speakers RMS power	40 W
Audio sample rate (24bit)	96 kHz
Soundbar speaker RMS power	220 W
Number of full-range drivers	5
Subwoofer type	Active subwoofer
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Product color	-
Country of origin	China
Virtual assistant	Amazon Alexa & Google Assistant
Audio formats supported	AAC, DTS, MP3, OGG, WAV
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
HDCP version	2.3
HDMI version	2.2
Bluetooth version	5.0
Connectivity technology	Wired & Wireless
Number of products included	2 pc(s)
Package depth	454.66 mm
Package width	1165.86 mm
Package height	284.48 mm
Package weight	14605.674 g

Weight and Dimensions

Depth	119.38 mm
Width	1059.18 mm
Height	55.88 mm
Soundbar weight	4399.8 g
Subwoofer depth	312.42 mm
Subwoofer width	220.98 mm
Subwoofer height	391.16 mm
Subwoofer weight	7801.8 g