To Next Page

To Previous Page

The product volume

is low

• Check the following and change the settings accordingly.

- Run the LG Sound Bar app, tap the Settings

buttonontherstscreen,and

change the [DRC] function to [Off] on the [Sound Settings] menu.

- When the product is connected to a TV, press the Settings button on the TV

remote control, select the [Speaker] menu, and change the [Digital Sound Output]

setting from [PCM] to [AUTO] or [BITSTREAM].

- If the product is connected to a playback device such as a DVD player or Blu-ray

disc player, go to the connected device's Settings menu. Change the [Digital Sound

Output] setting from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM]. Set

the [DRC] of the connected device to [OFF].

- If the product's Night Time mode is on, turn it off by pressing the Settings

button and Left/Right and then Up/Down.

The product fails

to recognise a USB

storage device

• TheproductmaynotsupporttheleformatoftheUSBstoragedevice.Formatthe

USB storage device and reconnect it. When formatting, refer to the USB storage

deviceformatssupportedbytheproductandselectanappropriateleformat.([

See "Connecting to a USB Storage Device" on page 41.)

A Bluetooth device

cannot be paired

• Press the Settings button on the Bluetooth device and check whether the

Bluetooth function is enabled. If Bluetooth is enabled, turn it off and on, then try

again.

• Remove any obstacles between the product and the Bluetooth device.

• Bluetooth pairing (connection) may not work properly depending on the Bluetooth

device type or the surrounding environment.

LG SPD75A User Manual

Other manuals for LG SPD75A