www.lg.com
*MFL69710428*
MODEL
SPJ4-S
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
Wireless
Rear Speakers
Kit
SIMPLE MANUAL
ENGLISH
a Connect the power cord of wireless receiver to
the outlet.
b Turn on the unit: The unit and wireless receiver
will be automatically connected. The receiver's
yellow - green LED turns on.
Wireless Receiver Connection Manually
If the rear speakers do not make sound, try to
connect manually.
a Press PAIRING button on the rear of the
wireless receiver.
y
The yellow - green LED on the wireless receiver
blinks quickly.
b Turn on the main unit.
c Pairing is completed.
y
The yellow - green LED on the wireless receiver
turns on.
Rear Speakers Connection1 Wireless Receiver Connection2
a Connect the speaker cables to rear speakers
correctly.
b Connect the Wireless Receiver and the rear
speakers (Grey: right, Blue: left) with the speaker
cables.
c Turn on the Surrond function to enjoy surround
sound.
Speaker design and connection method may be
different according to models.
Rear speaker
(Left)
Wireless
Receiver
Rear speaker
(Right)
Transparent
Black stripe
Transparent
Black stripe
Additional Information
Specication of Wireless reciever
Power
requirement
Refer to the main label on the
wireless receiver.
Power
consumption
Refer to the main label on the
wireless receiver.
Dimensions
(W x H x D)
Approx.
60 mm x 220 mm x 175 mm
(2.36 inches x 8.66 inches x
6.88 inches)
Design and specications are subject to change
without notice.
About Ferrite Core (Optional)
twice
Surround Sound On/Off
When you turn on surround function, you can enjoy
magnificent surround sound for all the input sound
source with rear speakers.
The initial setting for the surround function is
OFF, turn the surround function ON to use it.
SJ4R/SJ4Y
Surround On: Press and hold REAR LEVEL o button
on the remote control about 2 seconds.
Surround Off: Press and hold REAR LEVEL p button
on the remote control about 2 seconds.
SJ5Y
Surround On: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO
VOL button repeateadly to select ON - SURROUND in
the display window.
Surround Off: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO
VOL button repeateadly to select OFF - SURROUND in
the display window.
LG Customer Information Center
1 888 542-2623 CANADA
Register your product Online!
www.lg.com
Industry Canada Statement
This device complies with Industry Canada’s licence-exempt
RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
(i) the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
(ii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the bands
5250-5350 MHz and 5470-5725 MHz shall be such
that the equipment still complies with the e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the band 5725-
5850 MHz shall be such that the equipment still
complies with the e.i.r.p. limits specied for point-to-
point and non-point-to-point operation as appropriate;
and
(iv) the worst-case tilt angle(s) necessary to remain
compliant with the e.i.r.p. elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated.
(devices operating in the band 5250-5350 MHz with
a maximum e.i.r.p. greater than 200 mW)
(v) High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.