LG SPL5B-W - When you feel the output sound of the unit is low.; Bluetooth pairing does not work well.; The unit does not connect with Bluetooth device.

Troubleshooting40
Troubleshooting
4
Symptoms Cause & Solution
When you feel the output
sound of the unit is low.
Check the details below and adjust the unit according to them.
y
Switch the state of DRC function to [OFF] by using “LG Wi-Fi Speaker”.
y
With the sound bar connected with TV, change the AUDIO DIGITAL OUT
setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
y
With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
y
Change Audio DRC setting on connected device setup menu to [OFF] state.
y
Make sure Night Time mode is not On. Turn [OFF] Night Time mode.
Bluetooth pairing does
not work well.
y
Be sure your Bluetooth device is on.
y
Switch Bluetooth off and on again on your Bluetooth device, then try pairing
again.
y
Remove the obstacle in the path of the Bluetooth device and the unit.
y
Depending on the type of the Bluetooth device or surrounding environment,
your device may not be paired with the unit.
The unit does not connect
with Bluetooth device.
y
Turn off the Bluetooth connection lock function. (Page 33.)