LG SPN5-W - Page 32

32
Read before connecting via Bluetooth
Read before connecting via Bluetooth
• The closer the Bluetooth device is to the product, the better your connection.
• You can connect only one Bluetooth device to the product at a time.
• If you pressed the Function
button of the product and selected the “BT” option, but could not connect to
the Bluetooth device, you will see “READY” on the status display. Check the status of the Bluetooth device.
Bluetooth functions controllable with the remote control of the product
Play and pause, skip, and volume control
• If the Bluetooth device does not support your Android or iOS operating system, you will not be able to control
the Bluetooth device with the remote control of the product.
Note
• Once the connection has been established between the product and the Bluetooth
device, you will only need to press the Function
button of the product while the device’s
Bluetooth function is turned on. Select “BT” to re-establish the connection automatically.
• If the product is turned off and then turned on again, the Bluetooth device will not be
reconnected automatically, even if you select “BT”.
• The function may not be supported or may operate differently depending on the Bluetooth
device type.
• When you connect Bluetooth device (iOS device etc.) to this product or operate the device,
the volume level can be synchronized with each other.