Networks Settings 134
When you return to the Nationwide Sprint Network, voicemail notification will resume as normal.
Roaming Mode
Your phone allows you to control your roaming capabilities. By using the Roaming menu option, you can
determine which signals your phone accepts.
Choose from two different settings on your dual-band phone to control your roaming experience.
1. Tap > Tools > Settings > Networks tab > Roaming.
2. Tap Roaming mode to change the CDMA roaming mode.
Home only to access only the home area mobile network, which is the Nationwide Sprint
Network. This option also prevents roaming on other networks.
Automatic to seek service off the Nationwide Sprint Network. When Sprint service is
unavailable, the phone searches for an alternate system.
3. Tap each Domestic roaming option and International roaming switch and connect to voice and
data service while roaming.
Note: With Data roaming off, you can still transmit data with a Wi-Fi connection. See Configure Wi-Fi
Settings
.
Roaming Guard
Roaming guard makes it easy to manage your roaming by requiring confirmation before placing or
answering a roaming call.
To turn Call Guard on or off:
1. Tap > Tools > Settings > Networks tab > Roaming > Roaming guard.
2. Tap each roaming guard option to activate or deactivate this function. When active, an extra key
press is required for dialing when in a roaming area.
Note: Call Guard is turned on by default on your phone. Voice dialing and speed dialing are not available
when you are roaming with Call Guard enabled.
To place roaming calls with Call Guard on:
1. Tap > .
2. Enter 1 + area code + the seven-digit number and tap .
To answer incoming roaming calls with Call Guard on:
1. Swipe in any direction. A message will be displayed notifying you that roaming charges will
apply.
2. Tap YES.
To Next Page
Loading...
