Global Services 84
Enable Global Roaming Mode
Your phone is designed to enter global roaming mode automatically when you activate your Sprint
Worldwide service, meaning that it should automatically connect to an appropriate CDMA/LTE network or
GSM/UMTS network when you travel. You may set global roaming options through the settings menu.
You may also need to set your network mode options through the settings menu. See
Set the
Communications Method for Global Use
.
To set your roaming options manually:
1. Tap > Tools > Settings > Networks tab > Roaming.
2. Tap Roaming mode.
3. Tap Home only or Automatic.
The selected roaming method is set.
4. Tap Roaming guard.
5. Select roaming guard options for each category.
The selected options are set.
Set the Communications Method for Global Use
Select a communications method for an overseas carrier as needed.
1. Tap > Tools > Settings > Networks tab > More > Mobile networks.
2. Tap Network mode > Automatic / LTE/CDMA / CDMA / GSM/UMTS.
The communications method is set.
Note: At the time of purchase, your phone is set to the Automatic mode by default. This allows global
usage and normally will not need to be changed.
Select a Carrier
You can select a specific local carrier to use when traveling internationally. At the time of purchase, your
phone is preset to connect automatically to an appropriate carrier in your current area.
1. Tap > Tools > Settings > Networks tab > More > Mobile networks > 4G settings >
Network operators.
2. Tap an available network.
The selected carrier is set.
To select automatically to an appropriate carrier (default), tap Choose automatically.
To Next Page
Loading...
