4
Manually connecting the soundbar to the wireless subwoofer or rear
speakers ([ See “Connecting the wireless subwoofer manually”,
"Connecting the rear speakers manually" on page 8, 10.)
If you see a red LED on the wireless subwoofer or rear speaker, it means that the soundbar is not
connected to the speakers. If this is the case, connect them in the following order.
A Press the Power
button on the soundbar to turn it off.
B Press the PAIRING button on the back of the wireless subwoofer or rear speaker. Check if
each LED blinks green.
- If you still see a red LED on the wireless subwoofer, press and hold the button on the back of
the subwoofer again.
C Press the Power
button on the soundbar to turn it on.
D When the connection is established, you will see a green LED light on the wireless subwoofer
or rear speaker light up.
To Next Page
Loading...
Need help?
General
