Why does my LG T1666NEHT2A Washer show a 1E Inlet Error?
- AAlexandra ParkerAug 10, 2025
The 1E Inlet Error on your LG Washer can occur for several reasons. It may be that the water supply tap(s) are not fully open, so ensure they are completely open. The water supply hose(s) might be kinked, pinched, or crushed; straighten or reinstall them. Also, the filter of the supply hose(s) could be clogged, so check and clean it. If the water supply pressure is too low or too high, contact a plumber. Finally, do not use leak limiting hose(s).