4-7. TROUBLE SHOOTING METHODS ACCORIDNG TO ERROR MESSAGE
• The connector (3-pin, male, white) in the MOTOR HARNESS is not
connected to the connector(3-pin, female, white) of STATOR
ASSEMBLY.
• The electric contact between the connectors (3-pin, male, white) in
the MOTOR HARNESS and 4-pin, female, white connector in the
MAIN PWB ASSEMBLY is bad or unstable.
• The MOTOR HARNESS between the STATOR ASSEMBLY and
MAIN PWB ASSEMBLY is cut (open circuited).
• The hall senso
r is out of order/defective.
LOCKED
MOTOR
ERROR
8
CAUSESYMPTOMERROR
• The connector (3-pin, male, white) in the MOTOR HARNESS is not
connected to the connector(3-pin, female, white) of STATOR
ASSEMBLY.
• The electric contact between the connectors (3-pin, male, white) in
the MOTOR HARNESS and 4-pin, female, white connector in the
MAIN PWB ASSEMBLY is bad or unstable.
• The MOTOR HARNESS between the STATOR ASSEMBLY and
• Have coin insert between Tub & Washing wings.
• Have foreign object ( Pin , Clip , etc.) insert between
Tub & Washing wings.
MAIN PWB ASSEMBLY is cut (open circuited).
• The hall senso
r is out of order/defective.
LOCKED
MOTOR
ERROR
8
COIN
LOCK
ERROR
9
CAUSESYMPTOMERROR
40
To Next Page
Loading...
