Page 1/5 V3 - 2020
LG TWINWash® - Installation Guide (Large)
Follow the steps below for a quick and simple installation. Further information can be found in the box.
Before You Start
Final Installation Checklist
Having problems? Get in touch.
Allow 30-45 minutes for installation.
Ensure two people work together.
Clear a working space around the product.
Unbox all products and remove all protective wrapping.
Ensure that no screws, brackets or accessories are lost.
You will require:
1x Phillips Head Screw Driver
1x Spirit Level
1x Pliers
2x Powerpoints
1x Cold Water Connection
1x Hot Water Connection (If Applicable For Model)^
This guide is for the following front loader models:
WD1216HTE
WDC1215HSVE
TWIN171216T
TWIN171215S
1 I have secured the mini washer cover into place.
2 I have secured the front loader and mini washer together using a total of 16 screws.
3 I have ensured the machine is level, has no movement and used anti-slip pads if required.
4 I have connected the water lines, removed any kinks and checked there are no leaks.
5 I have secured the drain hoses with included clamps and ensured they are fastened to a drain outlet.
6 I have check the power cables are not caught on any items behind the washer.
7 I have removed the transit bolts from the back of the front loader.
^ Hot water connection is for front loader only and is not on all models.
For installation support, contact our Dealer Support Team,
Phone: 02 8811 8861 | Hours: 8am – 6pm EST, Monday – Friday.
To Next Page
Need help?
General
