A
areyesJul 28, 2025
How to fix LG UltraGear 27GL83A when nothing is displayed on the screen?
- MmckayshellyJul 28, 2025
If nothing is displayed on your LG Monitor, ensure the power cord is correctly plugged into the outlet and the power cable is properly connected. Then, press the power button. If the monitor is in sleep mode, move the mouse or press any key on the keyboard. Also, verify that the connected input is enabled in the Menu settings (Menu > Input). Check if the computer is turned on. If the issue persists, check and reconnect the signal cable between the PC and the monitor. Finally, make sure to install the display driver from the LG website (http://www.lg.com) and verify that your graphics card supports the Plug and Play function. If the screen is not currently set to the recommended resolution, please see the Product Specification section of this manual to set the appropriate frequency.