LG UltraGear 27GN95R - Input Source Selection; Input Mode and Aspect Ratio; General Monitor Settings

22
ENGLISH
[Input]
[Settings] > [Input]
• [Input]: Selects the input mode.
• [Ratio]: Adjusts the aspect ratio of the screen.
The display may look the same for [Full Wide], [Original], and [Just Scan] options at the recommended
resolution.
There is no [Just Scan] menu on [Adaptive-Sync]/[FreeSync Premium Pro] Mode. (Go to [Game Adjust] >
[Adaptive-Sync]/[FreeSync Premium Pro], to set [Adaptive-Sync]/[FreeSync Premium Pro] [On] or [Off])
- [Full Wide]: Displays the video in widescreen, regardless of the video signal input.
- [Original]: Displays video according to the aspect ratio of the video signal input.
- [Just Scan]: The aspect ratio is not adjusted from the original.
• [Auto Input Switch]: When [Auto Input Switch] is set to [On], display will automatically switch to new input
when connected.
[General]
[Settings] > [General]
• [Waves MaxxAudio
®
]: Select the sound equipment what you are using.
[Over-the-ear] [On-ear] [Ear-buds]
- [Off]: Disables the [Waves Maxx Audio
®
] feature.
• [Language]: Sets the menu screen to the desired language.
• [SMART ENERGY SAVING]: Conserve energy by using luminance compensation algorithm.
- [High]: Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.
- [Low]: Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.
- [Off]: Disables the feature.
- The value of energy saving data may differ depending on panel and panel suppliers.
- If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher
or lower depend on source.
• [Deep Sleep Mode]: When Deep Sleep mode is enabled, power consumption is minimized while the monitor
is in standby mode.
- [On]: Enables [Deep Sleep Mode].
- [Off]: Disables the feature.