21
ENGLISH
• [Automatic Standby]: If there is no operation on the monitor for a certain period of time, the monitor will
automatically switch to standby mode.
• [HDMI Compatibility Mode]: [HDMI Compatibility Mode] feature can recognize the legacy equipment that
does not support HDMI 2.0.
- [On]: Enables [HDMI Compatibility Mode].
- [Off]: Disables [HDMI Compatibility Mode].
• [DisplayPort Version]: Set DisplayPort Version to the same version as the connected external device. To use
the HDR function, set to [1.4].
• [Buzzer]: This feature lets you set the sound generated from Buzzer when your monitor powers on.
• [OSD Lock]: This feature disables the configuration and adjustment of menus.
All features are disabled except [Brightness], [Contrast] in [Picture Adjust], [Input], [OSD Lock] and
[Information] in [General].
• [Information]: The following display information will be shown; [Total Power On Time], [Resolution].
• [Reset to Initial Settings]: Returns to the default settings.
NOTE
• [HDMI Compatibility Mode]
- If the connected device does not support [HDMI Compatibility Mode], the screen or sound may not work
properly.
- When HDMI Compatibility Mode is on, 2560x1440@120/144Hz resolution is not supported.
- Some older graphics cards do not support HDMI 2.0,but you can select HDMI 2.0 resolution in the control
panel of window.
This may cause the screen to appear abnormally.
To Next Page
Loading...
