18
ENGLISH
[Game Adjust]
[Settings] > [Game Adjust]
• [Game Mode]: you can select picture modes for game display settings.
- [Gamer 1]/[Gamer 2]: [Gamer 1] and [Gamer 2] picture modes allow you to save two sets of customised
display settings, including game-related setup options.
- [FPS]: This mode is optimised for FPS games. It is suitable for very dark FPS games.
- [RTS]: This mode is optimised for RTS games.
- [Vivid]: Optimised the screen for vivid colors.
- [Reader]: Optimises the screen for reading documents. (for SDR only)
- [HDR Effect]: Optimises the screen for high dynamic range. (for SDR only)
- [sRGB]: A standard RGB color space for the monitor and printer. (for SDR only)
- [Color Weakness]: This mode is for users who cannot distinguish between red and green. It enables users
with color weakness to easily distinguish between the two colors. (for SDR only)
- [Calibration 1]/[Calibration 2]: Adjusts to the calibrated screen. Please install to run
calibration. (for SDR only)
NOTE
• The [Game Mode] can be set depends on the Input signal.
• If the [Game Mode] is changed in the DP (DisplayPort) input, the screen may flicker or the resolution of your
PC screen may be affected.
• HDR content may not display correctly depending on Windows OS settings, please check HDR On/Off settings
in Windows.
• When the HDR function is turned on, the characters or picture quality may be poor according to Graphic card
performance.
• While the HDR function is on, screen flickering or cracking may occur when changing the monitor input or
power on/off according to Graphic card performance.
• For information about whether the graphics card and game support HDR, visit their manufacture's website.
• [Dual-Mode]: By increasing the refresh rate, you can experience smoother and faster motion.
- [Off]: It can support up to 3840x2160 at 240Hz, and may vary depending on PC performance.
- [On(Full Wide)] / [On(27")] / [On(24")]: It can support up to 1920x1080 at 480Hz, and may vary
depending on PC performance.
Ů Screen size is changed following each settings.
- [Dual-Mode] button allows you to switch [Dual-Mode] between [Off] and the previous selection [On(Full
Wide)], [On(27")] or [On(24")].
Ů Initially switches between [Off] and [On(Full Wide)].
• [Adaptive-Sync]/[VRR]: This function shows a clear screen without screen tearing or stuttering in the game
environment.
However, screen flickering may occur in some game environments.
- Supported Interface: DisplayPort (Adaptive-Sync), HDMI (VRR).
- Supported Graphic Card: A graphic card that supports NVIDIA's G-SYNC or AMD’s FreeSync is necessary.
- Supported Version: Make sure to update the graphic card to the latest driver.
- For more information and requirement, refer to NVIDIA website (www.nvidia.com) and AMD website
(www.amd.com).
• [Black Stabilizer]: You can control the black contrast to have better visibility in dark scenes. You can easily
distinguish objects on dark game screens.
• [Crosshair]: Crosshair provides a mark on the centre of the screen for First Person Shooter (FPS) games.
Users can select the crosshair that fits their gaming environment among four different crosshairs.
• [FPS Counter]
- [On]: The indicator is displayed on the upper left of the screen. It will reflect the actual frame rate that is
received at the input. You can also adjust the position of [FPS Counter]. (upper left/upper right/lower right/
lower left)
- [Off]: Does not use the [FPS Counter] feature.
- [FPS Counter] and [Crosshair] feature can not be used at the same time.
• [Game Reset]: Returns game settings to the default settings.
To Next Page
Loading...
