LG UR340C Series - Page 44

32
ENGLISH
19 Program [Skip]/[Add] (Command: m b)
► To set skip status for the current Channel.
Transmission
(m)(b)( )([Set ID])( )([Data])(Cr)
[Data] 00: Skip
[Data] 01: Add
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
20 Key (Command: m c)
► To send IR remote key code.
Transmission
(m)(c)( )([Set ID])( )([Data])(Cr)
Data: Key codes - 24
Ack
(c)( )([Set ID])( )(OK/NG)([Data])(x)
21 Control [Backlight] (Command: m g)
► To control the backlight.
Transmission
(m)(g)( )([Set ID])( )([Data])(Cr)
Data Min: 00 to Max: 64
Ack
(g)( )([Set ID])( )(OK/NG)([Data])(x)
18 Tune Command (Command: m a)
► Select channel to following physical number.
Transmission
(m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data]
02)(Cr)
(Data 00)(Data 01) Channel Data
[Data] 00: High channel data
[Data] 01: Low channel data
- ex. No. 47 00 2F (2FH)
No. 394 01 8A (18AH),
DTV No. 0 Don’t care
[Data] 02: (Antenna)
0 x 00: Analogue Main
0 x 10: DTV Main
0 x 20: Radio
(Cable)
0 x 80: Analogue Main
0 x 90: DTV Main
0 x A0: Radio
(Satellite)
0 x 40: DTV Main
0 x 50: Radio Main
Channel data range
Min: 00 Max: 270F (0 to 9999)
Ack
(a)( )([Set ID])( )(OK/NG)([Data])(x)