LG UR340C Series - Page 45

33
ENGLISH
22 Input select (Command: x b) (Main Picture Input)
► To select input source for main picture.
Transmission
(x)(b)( )([Set ID])( )([Data])(Cr)
[Data] Structure
MSB LSB
0 0 0 0 0 0 0 0
External Input Input Number
External Input Data
0 0 0 0 DTV
0 0 0 1 Analogue
0 0 1 0 AV
0 1 0 0 Component
0 1 1 0 RGB
0 1 1 1
HDMI
1 0 0 0
1 0 0 1
1 0 1 0
Input Number Data
0 0 0 0 Input1
0 0 0 1 Input2
0 0 1 0 Input3
0 0 1 1 Input4
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
23 Channel(Programme) Block/Unblock
(Command: m d)
► This command may work differently depending
upon model and signal.
► For South Korea, North/Latin America except
Colombia Model
Transmission
(m)(d)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data]
02)([Data] 03)([Data] 04)(Cr)
([Data] 00): Physical Channel Number
([Data] 01)([Data] 02): Major Channel Number
- ([Data] 01): High Channel data
- ([Data] 02): Low Channel data
00 00 ~ 27 0F (Decimal: 0 ~ 9999)
([Data] 03)([Data] 04): Minor Channel Number
- ([Data] 03): High Channel data
- ([Data] 04): Low Channel data
([Data] 05): Input Source
- 02: Antenna TV (DTV)
- 06: Cable TV (CADTV)
- 0b: Cable DTV Plus
([Data] 06): block(01)/unblock(00)
Ack
(d)( )([Set ID])( )(OK/NG)([Data] 00)([Data] 01)([Data]
02)([Data] 03)([Data] 04)(x)
* Block/Unblock Command Examples
Block/Unblock Cable DTV (DVB-T) Channel 18-2
([Set ID]) = 01
([Data] 00) = Physical Channel Number 18 = 12(HEX)
([Data] 01) & ([Data] 02) = Major Channel Number is
18 = 00 12(HEX)
([Data] 03) & ([Data] 04) = Major Channel Number is 2
= 00 02(HEX)
([Data] 05) = cable DTV = 06
([Data] 06) = block(01)/unblock(00)
Result:
md 01 12 00 12 00 02 06 (01/00)