51
TROUBLESHOOTING
ENGLISH
Clothes have
damp spots after a
Sensor Dry
programme.
Very large load or very small load. Single large item such
as a blanket or comforter.
• If items are too tightly packed or too sparse the sensor may
have trouble reading the dryness level of the load. Use a
Timed Drying programme for very small loads.
• Large, bulky items such as blankets or comforters can
sometimes wrap themselves into a tight ball of fabric. The
outside layers will dry and register on the sensors, while the
inner core remains damp. When drying a single bulky item,
it may help to pause the cycle once or twice and rearrange
the item to unwrap and expose any damp areas.
• To dry a few remaining damp items from a very large load
or a few damp spots on a large item after a Sensor Dry
programme has completed, empty the lint filter, then set a
Timed Drying programme to finish drying the item(s).
Symptoms Possible Cause & Solution
To Next Page
Loading...
