To Next PageTo Next PageWhat to do if LG VDS-ST1AU power supply has been cut off?
If your LG Battery Charger has no power, first ensure the power plug is correctly connected to the outlet. If you're using a multi-outlet strip, verify that the strip is turned on. Also, check your breaker to see if it has tripped or if there is a power outage in your area.
Why LG VDS-ST1AU Battery Charger product setting initialization doesn't work?
If initializing your LG Battery Charger settings doesn't work even after re-plugging it, the internal motor might not be working correctly. Disconnect the power plug from the outlet and contact an LG Electronics Service Centre.
General advice to read all instructions carefully before installation or operation to ensure safety and simplicity.
Explains safety symbols and their meanings to indicate potential risks and operations that can cause harm.
Details critical safety warnings to prevent serious injury or death from improper use of the appliance.
Highlights important safety cautions to prevent minor injuries or damage to the product or property during use.
Identifies and describes the main components and parts of the Auto Empty Charging Station.
Lists and details the various accessories included with the charging station for setup and use.
Describes the contents of the installation kit and its role in securing the unit, especially the anti-tip kit.
Provides essential technical data, dimensions, weight, and power requirements for the appliance and its battery.
Step-by-step instructions for securely and safely installing the charging station on a hard and level floor.
Instructions for charging the main and spare batteries, including before charging and spare battery charging steps.
Explains initial setup and the functionality of the control panel and its features for basic operation.
Details the meaning of various indicators like dust emptying status, dust bag replacement, and spare battery charging.
Guidance on operating the product, covering manual and automatic dust emptying modes and their usage.
Procedures for cleaning the exterior of the charging station and its dust suction area using appropriate methods.
Step-by-step instructions for safely removing and replacing the dust bag in the charging station.
Instructions for cleaning the motor protection and exhaust filters to maintain optimal performance and air quality.
Offers solutions to common operational issues and symptoms like dust emptying problems before contacting customer service.
General| Brand | LG |
|---|---|
| Model | VDS-ST1AU |
| Category | Battery Charger |
| Language | English |
