LG VH9200DSW User Manual

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

www.lg.com

OWNER’S MANUAL

BEDDING CLEANER

VH9200DSW

This manual contains important information and instructions for

the safe use and maintenance of the bedding cleaner. Please read

all of the information on page 3, 4, 5 for your safety. Please keep

this manual in an easily accessible place for future reference.

Table of Contents

Questions and Answers:

J
John CortezAug 12, 2025
What to do if my LG Ultrasonic Jewelry Cleaner only vibrates and there is no suction?
- S
  Sharon NicholsonAug 12, 2025
  If your LG Ultrasonic Jewelry Cleaner only vibrates without suction, this may be due to the suction motor overheat prevention device. This can occur if the dust bin is full, the filter or inlet is blocked, or if the unit has been used for an extended period. Allow the unit to rest and cool for at least 40 minutes before attempting to operate it again. Before using it again, clean the filter and dust bin. If the inlet is blocked, remove the obstruction.
A
Ashley GibbsAug 16, 2025
Why does my LG VH9200DSW suddenly stop?
- C
  Christopher HarrisAug 16, 2025
  Your LG Ultrasonic Jewelry Cleaner may stop temporarily due to its inlet motor overheat prevention device. This can happen if the dust bin is full, the filters are clogged, the inlet is blocked, the product is excessively used for a long time, or if the power switch is accidentally touched.
A
Amber OrrAug 20, 2025
What to do if my LG Ultrasonic Jewelry Cleaner is not working at all?
- M
  Mackenzie SanchezAug 20, 2025
  If your LG Ultrasonic Jewelry Cleaner is not working, first ensure that the switch is turned on. Next, check the battery level and make sure it is not low. Lastly, verify that the operation procedure is correct according to the instructions in the manual.

LG VH9200DSW Specifications

General

Model	VH9200DSW
Type	Ultrasonic Jewelry Cleaner
Frequency	42 kHz
Power	35 W
Ultrasonic Frequency	42 kHz
Power Consumption	35 W
Timer	180, 280, 380, 480 seconds