Calibrating the Touch Screen
18
Calibra ting the Touch Screen
Using the Internal Keypad
1. Open the flip and press the
OK Key [
MENU
].
2. Press the Navigation Key
to scroll to the
Settings
menu
and press the OK Key .
3. Press
Touch Settings.
4. Press
Calibration.
5. Close the flip to start
calibration.
6. Touch the target on the screen
each time it appears.
Using the External Touch Screen
1. Unlock the Touch Screen by
touching or pulling down
the Unlock Key ( ) on the
left side of your phone and
touch to access the menu.
2. Touch the Settings icon .
3. Place your finger on the Touch
Screen and apply gentle
upward pressure to scroll the
list up, then touch
6. Touch
Settings.
4. Touch
4. Calibration.
The Touch Screen is a great way to interact with the LG Voyager
Phone. Take a little time to become accustomed to using it. If it doesn’t
react as you expect, adjust the Touch Screen calibration.
TIP
Keep in mind that the smaller the text appears on the screen, the smaller the
area of touch activation. Try zooming the screen in, if available, to increase the
touch area.
To Next Page
Loading...
