LG VR5901LVM Service Manual

11
PARTS SPECIFICATIONS
Maker: STANDARD Agitator Motor
ITEMS
1.0 STANDARD OPERATING
CONDITION
1.1 RATED VOLTAGE
1.2
OPERATING VOLTAGE RANGE
1.3 RATED LOAD
1.4
DIRECTION OF ROTATION
1.5 OPERATING TEMP, HU-
MID, RANGE
1.6 STORAGE TEMP, HUMID,
RANGE
2.0 TESTING CONDITION
2.1 POWER SUPPLY
2.2
MOTOR MOUNTING POSOTION
2.3 TEMPERATURE/HUMIDITY
2.4 DIRECTION OF ROTATION
3.0 ELECTRICAL CHARACTERISTICS
3.1 NO LOAD CURRENT
3.2 NO LOAD SPEED
3.3
RATED LOAD CURRENT
3.4 RATED LOAD SPEED
3.5 STALL CURRENT
3.6 STALL TORQUE
3.7
INSULATION RESISTANCE
3.8 DIELECTRIC STRENGTH
3.9
PERFORMANCE CURVE
SPECIFICATIONS
12.0 V
8.0 V ~ 24.0 V
4.0 mN.m ᴾ@40.8 gf.cm
CCW & CW
-10 ᴱ@@75 ᴱ
5 %RH ~ 95 %RH
-10 ᴱ@@75 ᴱ
5 %RH ~ 95 %RH
DC onstant power supply
Shaft output side wl any direction
10 ᴱ@@30 ᴱ
30 %RH ~ 95 %RH
Refer to JIS standard (20 ᴱᴦ2
ᴱ,65%ᴦ5%) in case of problems
CCW
70 mA (max.)
3700 rpm ᴦ@15% rpm
270 mA (max.)
3100 rpm ᴦ@15% rpm
1.5 A (max.)
35.0 mN.m (min.)
10 MΩ 500 VDC 1 minute
AC 500V 2.0 mA for one minute or
RS395-ST-15130
CONDITIONS
DC constant power supply between motor terminal
Pulley load
View point: Shaft output direction
View point: Shaft output direction
General
30~60 sec run-in period before
measurement taken
Based on measurement at two different load
( 7.35mN.m & 21mN.m)
Applied between motor housing and terminal without failure
Between motor terminal and motor metal housing
AC 600V 2.0 mA for one second

LG VR5901LVM Specifications

General

Brand	LG
Model	VR5901LVM
Category	Vacuum Cleaner
Language	English