THE BASICS
pg 7
8: The handset will prompt you for the passcode. Consult the Bluetooth®
accessory instructions for the appropriate passcode (typically “0000”- 4 zeroes).
Enter the passcode and press the OK Key .
9: Once pairing is successful, select Always Ask or Always Connect and press
the OK Key .
0: Once connected, you will see the device listed in the Bluetooth® Menu and the
Bluetooth® device connected icon will show up on your enunciator
when connected to the Bluetooth® device.
Placing and receiving calls
Placing calls
1. Make sure the phone is turned on. If not, press for about three seconds.
If necessary, enter the lock code.
2. Enter the phone number.
3. Press .
4. Press to end the call.
NOTE: Your phone has a Voice Commands feature that also lets you make calls by phone number,
name, or location.
To Next Page
Loading...
