8
EN
INSTALLATION
Circuit Breaker Installation
Read thoroughly and follow all directions provided.
A circuit breaker must be installed between the power source and the unit if the plug is not used (see
illustration below).
Main Power sourceMain Power source
Circuit BreakerCircuit Breaker
Use a circuit breaker or time Use a circuit breaker or time
delay fuse.delay fuse.
NOTE
• Use 15 A circuit breaker.
Installation Overview
FoamFoam
Drain pipeDrain pipe
Tools Needed
Phillips-head screwdriver Flat-blade screwdriver Pencil Level
Tape measure Cutting knife Scissors