LG W081CM - Control Locations

1.4 FEATURES
* Designed for COOLING ONLY.
* Powerful and whispering cooling.
* Slide-in and slide-out chassis for the simple
installation and service.
• Side air-intake, side cooled-air discharge.
1.5 CONTROL LOCATIONS
1.5.1 COOLING ONLY MODEL
* VENTILATION
The ventilation lever must be in the CLOSE position
in order to maintain the best cooling conditions.
When a fresh air is necessary in the room, set the
ventilation lever OPEN position.
The damper is opened and room air is exhausted.
* THERMOSTAT
Thermostat will automatically control the temperature
of the room. Select a higher number for a cooler
temperature in the room. The temperature is selected
by positioning the knob to the desired position.
The 5 or 6 position is a normal setting for average
conditions.
* OPERATION
Off - Turns air conditioner off.
Med Fan - Med speed fan operation without cooling.
Low Fan -Low speed fan operation without cooling.
High Cool - Cooling with high speed fan operation.
Med Cool - Cooling with med speed fan operation.
Low Cool - Cooling with low speed fan operation.
* OPERATION
Off (О ) :Turns the air conditioner off.
Low Fan ( © ):Permits the low fan speed operation
without cooling (heating).
) :Permits cooling with the low fan
speed operation.
Low Cool ( sk
High Cool ( 2 ) :Permits cooling with the high fan
speed operation.
Low Heat ( x ) :Permits heating with the low fan
speed operation.
High Heat ( xt) :Permits heating with the high fan
speed operation.
• Auto Swing (For R1403/WR1210)
On: Air Swing is operated while operation knob is set to
the Cool position
Off: Stops the operation of air swing.
• Built-in adjustable THERMOSTAT
• Washable one-touch filter
• Compact size
• Reliable and efficient rotary compressor is equipped.
и"
CLOSE айы VENT айы OPEN
LJ
Low Cool
Operation
Wait Three Minutes
Thermostat Before Restarting
Warme
They oy
first swirfeni
p