SETUP LANGUAGE
OSD
POSITION
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
POWER
• MENU" Exit INDICATOR
; I "Adjust
Adjust
• SET : Select another sub-menu
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
FACTORY
RESET
Restoreall factorydefault settings except
"LANGUAGE."
Press theV, A buttonsto resetimmediately.
If this does not improve the screenimage, restorethe factorydefaultsettings.
If necessary,performthe white balancefunctionagain.This functionwill be enabled only when
the inputsignal isan analog signal.
To Next Page
Loading...
