LG W2363D - Positioning your display

- 8 -
Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
6. LCD Panel Characteristic
10.1. LM230WF1-TLA1 (P/No: EAJ54852301)
(1) Standard Measurement Condition
• Ambient Luminance Level : dark ( < 10 lux)
• Ambient Temperature : Normal Temperature(10ºC ~ 25ºC)
• warm-up Time : More than 30 min (at Full White Pattern)
• Input Signal : VESA 1920X1080 @60 Hz
• Contrast : 70
• Brightness : Max. 100
• 6500K : Color Temperature Setting is 6500 K( if it’s not special specification)
• Clock/Clock Phase : The Best Setting
(2) Another Spec.: Product Specification Standard( LG(55)G1-1034 )
(3) Cosmetic Spec. : LCD Module IIS Spec.
6.1 Display Area
1) Active Display Area of the LCD Monitor Should be within Cabinet’s Bezel.
2) Distance Difference between Active Area and Bezel
| A-B|<1.0 mm , | C-D|<1.0 mm
A: The Distance from The Left of Active Area to the Bezel
B: The Distance from The Right of Active Area to the Bezel
C: The Distance from The Top of Active Area to the Bezel
D: The Distance from The Bottom of Active Area to the Bezel
C
B
D
A
Active Area
Bezel
No Item Content Remark
Maker LGD
Type 58 cm (23 inch)Full HD TFT LCD
Active Display Area 509.184 mm (H) X 286.416 mm (V)
Pixel Pitch [mm] 0.266 mm x 0.266 mm
1 LCD Module Electrical Interface 4ch-LVDS
Feature
Color Depth
8-bit with A-FRC, 16,777,216 colors
Size (Outline) [mm] 533.2(H) x 312.0(V) x 16.5(D) (Typ.)
Surface Treatment Hard coating(3H) &
Anti-Glare treatment of the front polarizer
Operating Mode
Transmissive mode, Normally White
Back light Unit 4 CCFL
R/T Typical Rise Time: 1, Fall Time: 4
Max. Rise Time: 3, Fall Time: 7
Minimum Normal Maximum
White Wx 0.283
Wy
Typ-0.015
0.298
Typ+0.015 9300K
2 CIE Color White u’ 0.313
Coordinates v’
Typ-0.03
0.329
Typ+0.03
Red Rx 0.644
Ry 0.336 6500K
Green Gx Typ-0.03 0.295 Typ+0.03
Gy 0.614
Blue Bx 0.146
By 0.072