EasyManua.ls Logo

LG W891402TC - User Manual

LG W891402TC
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNERS MANUAL
WASHING MACHINE
F1489TD2(1~9)
F1289TD2(1~9)
F1089TD2(1~9)
W891402TC
W891452TC
W891202TC
W891252TC
P/No.: MFL67503306
www.lg.com
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the washer is installed
correctly and safely. Leave these instructions near the washer
after installation for future reference.
Question and Answer IconNeed help?

Do you have a question about the LG W891402TC and is the answer not in the manual?

Overview

This document is an owner's manual for an LG Fully Automatic Washing Machine, providing instructions for safe installation, use, and maintenance.

Function Description

The LG washing machine is designed for fully automatic operation, featuring an Inverter Direct Drive system with an advanced brushless DC motor that directly drives the drum, eliminating the need for a belt and pulley. This design contributes to reduced noise and vibration. The machine also incorporates a built-in heater to automatically heat water to the optimal temperature for selected cycles.

For economic operation, it includes an Intelligent Wash system that detects the size of the load and water temperature, determining the optimum water level and washing time to minimize energy and water consumption. Protection against creases is achieved through alternating rotation of the drum. A Child Lock feature prevents children from pressing any buttons during operation. The Low Noise Speed Control system senses the amount of load and balance, distributing the load evenly to minimize spinning noise. An Auto Restart function allows the program to restart from the stage where it stopped in case of a power failure.

Important Technical Specifications

The washing machine is a front-loading model.

  • Power Supply: 220 - 240 V~, 50 Hz
  • Size (W x D x H): 600 mm x 550 mm x 850 mm
  • Weight: 61 kg
  • Max. Watt: 2100 W
  • Wash Capacity: 8 kg
  • Permissible Water Pressure: 100 - 1000 kPa (1.0 - 10.0 kgf/cm²)

The manual lists various programs with their corresponding maximum temperatures and loads:

  • Cotton: 60°C (Cold to 95°C), Less than 8.0 kg
  • Cotton Quick: 40°C (Cold to 60°C), Less than 8.0 kg
  • Synthetic: 40°C (Cold to 60°C), Less than 4.0 kg
  • Bedcover: 40°C (Cold to 40°C), 1 Single size
  • Bulky: 30°C (Cold), Less than 8.0 kg
  • Quick 30: 30°C (Cold to 40°C), Less than 2.0 kg
  • Delicate: 40°C (Cold to 40°C), Less than 2.0 kg
  • Hand Wash / Wool: 40°C (Cold to 40°C), Less than 2.0 kg
  • Bio Care: 60°C (95°C), Less than 8.0 kg
  • Boiling Care: 95°C, Less than 8.0 kg
  • Baby Care: 60°C (95°C), Less than 6.0 kg
  • Rinse+Spin: Less than 8.0 kg

Maximum RPM for different models and programs:

  • F14 (W891402TC, W891452TC): 1400 RPM for Cotton, Cotton Quick, Quick 30, Bio Care, Rinse+Spin; 800 RPM for Synthetic, Bedcover, Bulky, Delicate, Hand Wash/Wool, Boiling Care, Baby Care.
  • F12 (W891202TC, W891252TC): 1200 RPM for Cotton, Cotton Quick, Quick 30, Bio Care, Rinse+Spin; 800 RPM for Synthetic, Bedcover, Bulky, Delicate, Hand Wash/Wool, Boiling Care, Baby Care.
  • F10: 1000 RPM for Cotton, Cotton Quick, Quick 30, Bio Care, Rinse+Spin; 800 RPM for Synthetic, Bedcover, Bulky, Delicate, Hand Wash/Wool, Boiling Care, Baby Care.

Usage Features

The washing machine offers a range of programs and options accessible via a control panel with a program dial, option buttons, Child Lock, LED display, and Beep On/Off.

Basic Operation:

  1. Sort laundry according to care labels, soil level, color, and fabric type.
  2. Load laundry into the drum.
  3. Press the Power button.
  4. Select a program using the program dial.
  5. Select desired options (Additional Program, Temperature, Spin Speed, Other functions).
  6. Add detergent and fabric softener to the dispenser drawer.
  7. Press the Start/Pause button.

Programs: The manual provides a table of washing programs tailored for different fabric types and soil levels, including Cotton, Cotton Quick, Synthetic, Bedcover, Bulky, Quick 30, Delicate, Hand Wash/Wool, Bio Care, Boiling Care, Baby Care, and Rinse+Spin.

Extra Options:

  • Medic Rinse: Heats the final rinse to 40 degrees for better results or cleaner rinsing.
  • Pre Wash: Effective for heavily soiled laundry.
  • Intensive: Recommended for normal and heavily soiled laundry.
  • Crease Care: Prevents creasing.
  • Time Delay: Allows setting a delay for the wash cycle to start and finish automatically after a specified time interval.
  • Spin: Users can select the spin speed (RPM) or "No Spin" (which still rotates briefly at low speed for draining).
  • Rinse Hold: Leaves clothes suspended in water after a rinse without entering into spin.
  • Temp.: Water temperature can be selected (Cold, 30°C, 40°C, 60°C, 95°C) according to the program.

Other Functions:

  • Spin Only: Allows running only a spin cycle.
  • Child Lock: Locks the control panel to prevent accidental changes during operation. Activated by pressing and holding Medic Rinse and Pre Wash buttons for 3 seconds.
  • Beep On/Off: Toggles the sound signals. Activated by pressing and holding the Time Delay button for 3 seconds.
  • Tub Clean: A special cycle to clean the inside of the washing machine using a higher water level and spin speed. Activated by pressing and holding Intensive and Crease Care buttons for 3 seconds.
  • Door Lock & Detecting: For safety, the door locks during operation ("Door Lock" icon lights up). The machine also detects laundry load ("Detecting" is shown) by rotating slowly.

Adding Detergent: The dispenser drawer has compartments for main wash detergent, fabric softener, and pre-wash detergent.

  • Detergent Dosage: Follow manufacturer's instructions. Avoid excessive suds.
  • Fabric Softener: Do not exceed the maximum fill line. Softener is automatically added during the last rinse cycle.
  • Water Softener: Can be added to the main wash compartment, especially in hard water areas.
  • Using Tablet: Tablets are loaded directly into the drum.

Maintenance Features

Regular maintenance is crucial for the longevity and performance of the washing machine.

General Safety:

  • Unplug the power cord before cleaning the interior.
  • Turn off the stopcock if the machine is left unused for an extended period.

Water Inlet Filter:

  • The "1E" error icon indicates water is not entering the detergent drawer.
  • The filter can become clogged by hard water or lime deposits.
  • Cleaning Steps:
    1. Turn off the water tap.
    2. Unscrew the water inlet hose.
    3. Clean the filter using a hard bristle brush.
    4. Tighten the inlet hose.

Drain Pump Filter:

  • The drain filter collects threads and small objects.
  • Cleaning Steps:
    1. Allow water to cool down.
    2. Open the lower cover cap and pull out the hose.
    3. Unplug the drain plug and drain water into a container.
    4. Remove any extraneous matter from the pump filter.
    5. After cleaning, turn the pump filter and insert the drain plug.
    6. Close the lower cover cap.

Dispenser Drawer:

  • Detergents and fabric softeners can leave deposits.
  • Cleaning Steps:
    1. Pull out the dispenser drawer (by pressing the catch downwards).
    2. Clean the drawer under running water.
    3. Clean inside the recess with an old toothbrush.
    4. Insert the dispenser drawer.

The Washing Drum:

  • Limescale may build up in areas not easily seen.
  • Small metal articles (paper clips, safety pins) can cause rust spots.
  • The drum should be cleaned from time to time.
  • Use descaling agents or bleaches suitable for washing machines.
  • Remove any spots with a stainless steel cleaning agent.
  • Never use steel wool.

Cleaning Your Washer (Exterior & Interior):

  • Exterior:
    • Proper care extends life.
    • Clean with warm water and a neutral non-abrasive household detergent.
    • Immediately wipe off any spills.
    • Do not hit surfaces with sharp objects.
    • Do not use methylated spirits, diluents, or similar products.
  • Interior:
    • Dry around the washer door opening, flexible gasket, and door glass.
    • Run a washer through a complete cycle using hot water.
    • Repeat process if necessary.
    • To remove hard water deposits, use only cleaners labeled washer safe.

Cold Conditions:

  • If the washer is stored in an area where freezing may occur, follow these instructions to prevent damage:
    • Turn off water supply tap.
    • Disconnect hoses from water supply and drain water from hoses.
    • Plug electrical cord into a properly grounded electrical outlet.
    • Add 1 gallon (3.8L) of nontoxic recreational vehicle (RV) antifreeze to an empty wash drum. Close the door.
    • Set spin cycle and let washer spin for 1 minute to drain out all water.
    • Unplug electrical power cord, dry the drum interior, and close the door.
    • Remove dispenser drawer and drain any excess water from the compartments.
    • Store washer in an upright position.
    • To remove antifreeze from washer after storage, run an empty washer through a complete cycle using detergent. Do not add wash load.

Troubleshooting Guide: The manual includes a comprehensive troubleshooting guide for common issues like rattling/clanking noise, thumping sound, vibrating noise, water leaks, slow water entry, water not draining, oversudsing, washer not starting, washer not spinning, door not opening, and wash cycle time delays. It also lists error messages (e.g., 1E, OE, UE, dE, tE, FE, PE, CE, LE) with their possible causes and solutions.

SMARTDIAGNOSIS™: This function is available on specific models and allows for easy diagnosis of problems by transmitting signals to a call center agent via a smartphone.

Terms of Warranty: The warranty covers manufacturing defects but excludes issues caused by improper installation, misuse, neglect, pests, normal noise/vibration, incorrect maintenance, foreign objects, unauthorized repairs, or commercial use.

LG W891402TC Specifications

General IconGeneral
BrandLG
ModelW891402TC
CategoryWasher
LanguageEnglish

Related product manuals