LG WD-1020W - Page 12

*
DETERMINE
SVC
PROCESS
ACCORDING
TO
THE
RESULT
OF
TROUBLE
DIAGNOSIS
) Press the power button.
S
cesoenosgssenenczn testa toatcaecnecesnnceesseenesasocacsceeste
« Connect the power plug to
the outlet.
¢ Connect the inlet hose.
+ Incase of NORMAL program.
_ 2 RDO DENT AENNP MUA SS ENIT
ne
“ene
Check the water heating. |
:
SIO
+ Check if the drum rotate to
clockwise and counterclockwise.
- Press the button "WATER TEMP) i
and then the present
temperature in displayed. cock
ace aA!
“Sresoaraneconntetrencansansneananennenate
a Check the drain and spin Power off
chao
pconraneoanencennconainenenss
DOOR
- After power off, press the
_ [DOOR OPEN] button to
: check the door open.
i
epRE
SHONERS
6
@e2 @4
@{ 03
* Trouble shooting refer to (6.ERROR DISPLAY)
* Assemble and disassemble refer to (9.Disassembly Instructions)
* 1000 |
3H 800 |
@ MAIN © 650
SS SSSSIDSDAAI LORD NSERC COORD RMU ICONS
RARER SIERRAS
_goeeenenanas
"Senpnncecnennnnone
|
12
eter reananenoencnosnnncensacicreanemnange
button.
Soot ehonsementeakonnonenceted?
CURSE NRHN
SFO ONTENIENTE
of EAN
3
? Check the water supply.
SSC ee all
SSrneconcconcenceneeneeN ARNE
- Check shower because the
water supplied on the door
at first
Water removal
:
:
agape cemeenats em eiensrcenaneanacaan gen aaaman emmnanee cca
_ + If SVC is needed, during
check and remove
_ the remaining water by pulling
| out the hose cap.
"Re LAR RAMASRRER ERR
Nagiancenmeann tats
Ss.
YAEL REO RES