LG WD-1020W - Page 22

Is the water supplied?
Is the connection of hoses between inlet valve
and dispenser the same as the wiring?
Is softener put in the correct compartment of
drawer?
Is the softner cap clogged?
Review
TNO WATER SUPPLY ,
Check the wiring on the
dispenser.
aa ae aR Tae S|
Put in the correctly.
(eee |
Clean the cap and
drawer.
Is the pulley bolt released?
Is the belt worn?
Is the friction noise from the motor?
Fix the bolt tightly.
Replace the V-belt
(4400FR3116A)
Replace the motor.