LG WD-1020W - Page 24

When checking the voltage between connector
the PWB assy(Power) during washing.
is the voltage AC 220-240V?
Replace the PWB assy
(Power)
After power off, is the resistance of wire
connector 10 to 302?
After power off the heater terminal is
disconnected, is the resistance 10 to 30.2?
Replace the heater assy
When disconnect the connector on the
PWB assy (Main), is the resistance of the
wire connectors (Blue/ White) between
2.5k 2 to 180k 2(105C ~0T)?
Replace the thermistor
(6322FR2046B)
When checking thermistor on the tub cover,
is the thermistor unfixed above 2mm from
the rubber?
Push the thermistor
tightly to the rubber.
24