16
ow to use washer
H
Program
• 9 programs are available according to the
laundry type.
• Lamp will light up to indicate selected program.
1. Power
2. Initial Program
Power
• Press the Power button to turn power on and
off.
• To cancel the Time Delay function, the
Power button should be pressed.
• When the Power button is pressed, the washer
is ready for Cotton program. And the other initial
conditions as follows.
• So, if you want to advance into the washing
cycle without changing the program, just press
Start/Pause button and then the washer will
proceed.
■
Initial program
• [WD-1031(0~9)FDK]
- Cotton Program / Main wash / Normal Rinse /
1000 rpm / 60˚C
• [WD-1231(0~9)FDK]
- Cotton Program / Main wash / Normal Rinse /
1200 rpm / 60˚C
• [WD-1431(0~9)FDK]
- Cotton Program / Main wash / Normal Rinse /
1400 rpm / 60˚C
• When Start/Pause button is pressed, the
Cotton program is automatically selected.
- By turning the Program dial, the program is
selected in order of “Cotton - Cotton-Eco -
Synthetic - Delicate - Wool/Silk - Hand Wash -
Quick 30 - Duvet - Drain”.
Regarding to the laundry type for each program
Please refer to the page 14.
To Next Page
Loading...
