19
Water Temp.
• By turning the Program Dial, the water
temperature can be selected.
- Cold
- 30˚C / 40˚C / 60˚C / 95˚C
• Water temperature can be selected
according to the program.
The required temperature lamp will light up
for identification.
For the more detailed information, please
refer to the page15.
Child Lock
If you choose to lock
the buttons on the
control assembly to
prevent tampering this
function may be
selected.
• Child Lock can be set by pressing the
Rinse
+
button and Pre Wash button
simultaneously. (About three seconds)
• When child lock is set, all buttons are
inoperable except for power button.
•
To deactivate Child Lock system, press
Rinse
+
and Pre Wash buttons
simultaneously again. (About three seconds)
• To change to the desired program, whilst
in child lock mode.
1.
Press both Rinse
+
and Pre Wash together
once again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and
it is automatically canceled when
operational errors occur.
ow to use washer
H
To Next Page
Loading...
