LG WF-F60PC User Manual (English)

Questions and Answers:

D
Dustin CampbellAug 10, 2025
Why is my LG WF-F60PC Washer unbalanced?
- E
  Erik HuntAug 10, 2025
  An unbalanced LG Washer can occur if laundry is not evenly distributed inside the inner tub. Try to fill the laundry uniformly. Also, check if the washer is tilted and adjust the legs to ensure it's level. A disconnected or badly connected Ball Pressure Sensor connector can also cause this issue; in this case, check the B.P Sensor connector or replace the B.P sensor.
J
Johnny MosleyAug 17, 2025
What to do if my LG WF-F60PC is not draining?
- B
  Brandon VasquezAug 17, 2025
  If your LG Washer isn't draining, ensure the drain hose is positioned correctly (put the hose lower) and is not folded or clogged. Unclog the drain hose if necessary. A faulty drain motor or a bad connection to the P.W.B ASM could also be the cause. In this case, replace the drain motor or correct the connector contact.
C
clinton00Aug 25, 2025
How to fix water supply issues with my LG WF-F60PC?
- T
  Tracie JonesAug 26, 2025
  If you're experiencing water supply issues with your LG Washer, make sure the water faucet is open. If the water supply is interrupted, wait until it resumes. Also, the inlet valve may be clogged with dirt; clean or replace the filter. Check the connector contact to the inlet valve, and ensure the Yellow (YL) 2 pin connector has good contact with the P.W.B ASM; correct the connector contact if needed.
A
Anna JohnsonAug 31, 2025
What to do if I have problems with the ball pressure sensor on my LG WF-F60PC Washer?
- K
  kimcoleSep 1, 2025
  If you are experiencing issues with the ball pressure sensor on your LG Washer, ensure the connector for the BALL PRESSURE SENSOR or the BLUE(BL) 3 pin connector to P.W.B ASM has a good connection; correct the connector contact if needed. If the BALL PRESSURE SENSOR is faulty (indicated by a display number less than 63 or more than 70 in the initial state of QC TEST MODE), replace the BALL PRESSURE SENSOR.