LG WF-T1480TD - 4-7. TROUBLE SHOOTING ACCORDING TO ERROR MESSAGE

4-8. TROUBLE SHOOTING METHODS ACCORDING TO ERROR MESSAGE
For more detailed information for trouble shooting refer to page 46 to 57.
ERROR DECISION CAUSE FOR ERROR
BASIS OCCURRENCE
REMEDYERROR
tWATER LEVEL does
not rise to the set
level in 40 minutes.
tWater is not
completely drained
in 10 minutes.
t-BVOEry unbalance
during spin.
t
In the second QC
Mode the following
message is displayed.
WATER
SUPPLY
& INLET
V/V.
DRAINAGE
UNBALANCE
OVER
FLOODING
ERROR
tWater faucet is closed?
tWater supply is interrupted.
t*OMFU77JTDMPHHFEXJUIEJrts.
t$POOFDUPSIBTCBEDPOUBDUUP
the inlet valve.
tYellow(YL) 2 pin connector has
bad contact to the P.W.B ASM.
t*TUIFErain hose located
properly?
t%rain hose is not lowered.
t%rain hose is folded or clogged
due to freeze or dirts.
t#BE%rain Motor part or
WHITE(WH) 2 pin connector to
the P.W.B ASM has bad
connection.
t-BVOEry in the INNER TUB is
lled unevenly.
tWasher is tilted.
tS.F S/W is too closed to the
washing tub, or has bad contact.
t*TUIF$0//&$TOR of Ball
pressure sensor disconnected
or badly tonched?
t$IFck INLET valve
t0QFOwater faucet.
tWait until water supply is
resumed.
t$MFBOPSSFQMBDFöMUFr.
t$PSSFDUUIFDPOOFDUPSDPOUBDU
t4BNFBTBCove.
t)VOHVQErain hose at 0.9~1.3m
high. (For pump)
t1VUUIFIPTFMower.
(For : Non-pump)
t6ODMPHUIFErain hose.
t3FQMBDF%rain Motor or correct
the connector contact.
tTry to ll laundry uniformly in the
inner tub.
t"EKVTUUIFMFH
t$IFck and replace S.F S/W.
t$IFck B.P SENSOR
CONNECTOR or replace B.P
sensor
37