Basic Functions 56
Registering fingerprints
You can register and save your fingerprint on the device to use fingerprint
identification.
1
On the home screen, tap Settings Lock screen & security
Fingerprints.
• This feature is available only when the screen lock is set.
- Lock the device with a pattern, PIN or password.
• If the screen lock is not set, enable it by following the on-screen
instructions. See
Setting a screen lock
for details.
2
Check the location of the fingerprint sensor at the bottom center of
the screen, and lightly place your finger on the sensor.
• Make sure that the finger fully covers the fingerprint sensor.
3
Follow the on-screen instructions.
• Place your finger on the sensor and hold it until you feel a vibration.
• Move the same finger around on the sensor a little by little until the
fingerprint registration is complete.
4
When the fingerprint registration is done, tap OK.
• Tap Add more to register another fingerprint. If you register only
one fingerprint and the corresponding finger is not in a good
condition, the fingerprint recognition may not work well. As a
preventative measure, register multiple fingerprints.
To Next Page
Loading...
