LG WK2 S6 Series - User Manual

Questions and Answers

C
charleswilsonNov 22, 2025
Why my LG WK2 S6 does not operate?
- D
  Dustin DavidNov 22, 2025
  If your LG Washer is not operating, there could be several reasons: * The control panel may have powered off due to inactivity, so press the Power button. * Ensure the appliance is plugged securely into a working outlet. * Check if the water supply is turned on completely. * Make sure the programme is correctly set, the door is closed, and the Start/Pause button is pressed. * Verify that the door is fully closed and nothing is obstructing it. * Check the house circuit breakers or fuses and replace them if necessary. * Try resetting the control by pressing the Power button, reselecting the programme, and pressing Start/Pause. * Also, ensure you press Start/Pause after setting a programme, as the appliance turns off if it is not pressed within a certain time. * Check anoth...
R
Raymond LiAug 25, 2025
What to do if my LG Washer is leaking water?
- P
  pamela90Aug 25, 2025
  To address water leaking from your LG Washer: * Check for clogged house drain pipes and unclog them, contacting a plumber if needed. * Inspect the drain hose for improper installation or clogs; clean and straighten it, and regularly check the drain filter. * Ensure the drain pump filter cap is correctly fitted.
D
deannaschmidtAug 26, 2025
Why is my LG WK2 S6 not filling properly?
- J
  Joshua GordonAug 27, 2025
  If your LG Washer is not filling properly, check the following: ensure the inlet filters on the fill valves are not clogged. Also, check that inlet hoses are not kinked or clogged. Make sure that both hot and cold water taps are turned on all the way. Check supply hose connections to ensure hot and cold supply hoses are not reversed.
B
Brian HillAug 27, 2025
Why is my LG WK2 S6 Washer not draining water?
- T
  Timothy DavisAug 27, 2025
  If your LG Washer is not draining water, ensure that the drain hose is not kinked. Also, make sure that the drain hose is no higher than 1.2 m above the bottom of the appliance.
W
wilkinsondavidAug 29, 2025
How to fix 1E INLET ERROR on my LG Washer?
- P
  Patricia CurryAug 29, 2025
  If your LG Washer displays a '1E INLET ERROR', it indicates an issue with the water supply. First, check another tap in the house to ensure the water supply is adequate. Make sure the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them, or reinstall the hose. Finally, check the inlet valve filter for clogs, and clean it after turning off the taps and disconnecting the hoses.
S
susandavisSep 23, 2025
What does tE1 through tE7 TEMPERATURE SENSOR ERROR mean on my LG Washer?
- S
  steven76Sep 23, 2025
  If your LG Washer displays 'tE1 through tE7 TEMPERATURE SENSOR ERROR', turn off the appliance and call for service.
J
jonathan07Sep 16, 2025
Why is my LG WK2 S6 Washer cycle taking longer than usual?
- K
  kathryn79Sep 16, 2025
  If your LG Washer cycle time is longer than usual, add more items to allow the appliance to balance the loads if the load is too small. If you are washing heavy articles mixed with lighter items, always try to wash articles with similar weight in order to allow the appliance to evenly distribute the weight of the load for spinning. Manually redistribute the load if articles have become tangled.
A
andrewcarpenterSep 18, 2025
Why is the cycle end delayed on my LG Washer?
- H
  hsanchezSep 18, 2025
  If your LG Washer cycle end is delayed, it is normal if unbalance is detected or a suds removing programme is on. The time remaining shown on the display is only an estimated duration.
H
Heather SmithSep 8, 2025
What does PE PRESSURE SENSOR ERROR mean on my LG WK2 S6?
- J
  John BrownSep 8, 2025
  If your LG Washer displays 'PE PRESSURE SENSOR ERROR', close the water tap, unplug the power plug, and call for service.
P
Patricia SmithSep 5, 2025
What does LE MOTOR LOCKED ERROR mean on my LG WK2 S6?
- F
  Frank PattersonSep 5, 2025
  If your LG Washer displays 'LE MOTOR LOCKED ERROR', let the appliance wait for 30 minutes until the motor is cooled down and then, restart the cycle.

LG WK2 S6 Series Specifications

General

Type	Front Load Washer
Steam	Yes
SmartDiagnosis	Yes
Allergiene Cycle	Yes
ENERGY STAR Qualified	Yes
Front Load Washer	Yes
Number of Temperature Settings	5
Number of Spin Speed Settings	5
Delay Start	Yes
Child Lock	Yes
Color	White
Dimensions (H x W x D)	39" x 27"