What to do if my LG WKHC202HBA beeps and then nothing happens when a button is pressed?
If your LG Laundry Appliance beeps and then nothing happens when you press a button, the Control Lock feature may be turned on. To resolve this, turn on the washer, then press and hold the button that has 'Control Lock' on or under it for 3 seconds.
Why does my LG WKHC202HBA Laundry Appliance show an IE INLET ERROR?
An IE INLET ERROR on your LG Laundry Appliance can occur for several reasons. First, ensure that your water supply faucets are fully open and that the water inlet hoses are not kinked, pinched, or crushed. Also, the water inlet filters might be clogged and require cleaning. Low water supply pressure to the faucet or house could also be the cause; check another faucet to ensure adequate household water pressure. You can also disconnect the water inlet hoses from the washer and run a few gallons of water through the hoses to flush out any dirt. If the flow is still too low, it is recommended to contact a plumber to repair the water supply lines.
General| Energy Star Certified | Yes |
|---|---|
| Type | Washer Dryer Combo |
| Dryer Capacity | 5.0 cu. ft. |
| Steam Function | Yes |
| Capacity | 5.0 cu. ft. |
| Smart Connectivity | Wi-Fi |
| Color | Black |
To Next Page